L'Hexapod: Fabrication...
Previously published
This article was previously published on lhexapod.com as part of my journey of discovery into robotics and embedded assembly programming. A full index of these articles can be found here.
Here are some links that may help once I move onto fabricating the various pieces required to build the hexapod’s body.
- This is a simple 4 legged walking robot that was machined from an A4 piece of 4mm ply wood.
- This is the guy’s website, with more details of how he produced the robot.
- And this is the Dutch prototyping lab that he used to laser cut the pieces.
Finally, this is an interesting link to David Buckley’s walking robots page.
